Specna Arms presents the CORE™ line with theHAL™ chip. The trigger control system assists in the operation of the replica and allows easy programming of functions via the trigger and selector.
HAL™-Chip features:
-trigger detection based on magnetic sensors and Hall effect
-active brake
-Binary trigger
-Adjustable trigger sensitivity (5 levels from 20 to 100%)
-adjustable pre-cocking (6 levels)
-aUTO programmable firing modes (fully automatic, semi-automatic, 3-burst, 5-burst)
-sEMI programmable firing modes (Semi, Binary, AUG, Sniper)
-simple programming via the trigger
-Low battery alarm
-Compatible with brushless motors
**The AUTO function first fires a 3-shot burst and then fires Full Auto.
To meet customer expectations, Specna Arms presents the CORE™ line - a unique series of replicas that brings a new quality to the market. Attractive price combined with an innovative spring exchange system and high quality materials make this series suitable for both beginners and experienced airsoft players.
The receiver, the slide and the enlarged SF stock, which holds the battery, as well as the pistol grip are made of nylon fiber reinforced plastic. Other components such as the barrel, the RIS front, the flame arrester, the enlarged reloading handle and the tactical suspension are made of metal (all screws, pins, the grenade ejection window and the dummy bolt are made of steel). Markings and serial number are on the receiver.
The replica is very well fitted, the user will not experience any play between the lower and upper part of the body. The use of lightweight plastic body made it possible to reduce the weight, which makes it perfect for dynamic games or longer milslims. Also, the fiberglass reinforcement makes the body stronger than polymer and metal bodies.
The replica uses the ESA™ quick change system. This allows for quick and efficient adjustment of the replica's performance to the expected field conditions without the need for access to a workshop or a range of specialist tools - simply unscrew the shaft guide to reveal access to replace the spring, without having to pull out or dismantle the gearbox.
The advantages of the ESA™ system are hard to overestimate. Considering the arrangement in the environments themselves, this system guarantees the user considerable possibilities and great freedom. The ESA™ system makes it possible to change the main spring in a minimum of time and thus adapt the firing speed of the replica to the playing area, ensuring an ideal compromise between the effectiveness of the weapon and the safety of oneself and other players.
The replica has been fully adapted for use with LiPo and LiFe batteries. With an initial firing rate of ~380 FPS guaranteed by the pre-installed mainspring, the replica is perfectly suited for medium-range operations. An M90 spring is also included, which can be used to reduce the initial velocity to ~310 FPS, making the replica perfect for short-range or indoor use.
The gearbox conceals 8 mm plain bearings and the steel gears with bearings. The system is secured against reversing by four pawls. The lightweight polycarbonate piston is fitted with a solid steel rod for added strength. A type 1 cylinder and steel interrupter are also used, as well as a precision rotating hop-up chamber. The strength of the parts allows the use of M140 springs.
The finely crafted rotary hop-up chamber works perfectly with the high-quality 6.03mm precision barrel. The use of a precision barrel has a positive effect on the range and accuracy of the replica. It is important to remember to use high quality 6mm ammunition.
The replica is equipped with a 22mm RIS rail at the back, a set of RIS rails at the front and an adjustable buttstock. A folding sight is fitted to the upper RIS rail, which does not interfere with the optoelectronic sights. Thanks to the extendable buttstock, which is fitted with a non-slip, textured base, the length of the replica can be adjusted to suit the shooter's build and preferences. The standard flame extinguisher is mounted on a 14 mm left-hand thread so that a silencer can be fitted in its place.
The kit includes an S-MAG high-cap magazine with a capacity of up to 380 rounds. The S-MAG is an exclusive polymer magazine developed by Specna Arms. The distinctive texture consisting of Specna Arms logos is striking. The S-MAG ensures
Delivery:
- Replica
- Magazine high-cap 300 rounds
- Rail cover set
- Front grip
Caliber: 6mm
Length: 695 - 780mm
Weight: 2400g
Drive: AEG
Energy: <0.5 joule
Thread: 14mm CCW
Shot Mode: Semi / Full Auto
Hop-Up: adjustable
