Small arms in the bull-pup arrangement (sometimes known as bullless) have a long tradition and as many followers as skeptics. One of the advantages of this type of construction is, however, difficult to challenge - it's the ability to use a really long and effective barrel, while maintaining the relatively compact dimensions of the rifle itself. You also can't forget about aesthetic values - bull-poupes are simply characteristic and they cannot be mistaken for anything else.
As in the original firearm, the replica's body was made of strong, polymer plastic. The metal was used to manufacture the entire front part of the replica, as well as small elements such as the shell ejector flap or flame suppressor.
Both in the back and front of the replica there are metal holders for mounting the tactical suspension. Access to the hop up adjustment knob is obtained as standard after pulling back the reloading handle and exposing the ejector window. The handle can be locked in the back position. What is characteristic of this construction, the ejector windows are located on both sides, thanks to which left-handed users will also have convenient access. The flash hider is mounted on a 14mm left-hand thread.
The battery of the replica is located inside the stock (as long as we can use this word on the occasion of the - nomen omen - bullless). To do this, simply remove the rubber foot. No tools are needed for this, as it is snap-on. It also takes a few seconds to unfold the entire rifle into two parts - when we want to get to the hop-up chamber and the inner barrel, for example. To do this, you only need to press the metal pin - the lock and extend the fire selector, then slide the structure into 2 parts - the body, the front part and the barrel.
The replica has 4 22mm RIS rails: long, dorsal, and 3 smaller, on the sides and under the barrel of the replica.
The replica is equipped with a quick spring change system that allows the main spring to be replaced with minimal time. There is no need to remove the gearbox and unscrew the entire structure: just remove the butt stock, unscrew the plastic plug, and then through the hole in the rear wall of the gearbox remove the guide with the spring. The system allows quick and efficient adjustment of the replica's power to the conditions expected on an airsoft battlefield, without the need to have access to a workshop or a number of specialized tools. We can now easily guarantee the perfect compromise between fire efficiency and the safety of ourselves and other players.
The replica comes with a hi-cap plastic magazine with a capacity of 330 BBs.
The kit includes:
- replica
- magazine
- user manual
- bipod
Kaliber: 6mm
Length: 800mm
Weigth: 4200g
Magazine: High-Cap 330 rds
